As some of you may know i have been working on this car for quite a while now. I am starting my winter plans again to move further towards my goal of a finished car. Here is a link to the original build.

The car has been stored for a couple months now. I put it away a little early due to the bald tires and me buying a new car. It has an oil leak that needs fixing and i have some plans for it over the winter.

Got some new parts

New throttle cable, bump stops, and the o-rings to fix the oil leak at the oil filter housing.

I also got a new front end.



Notice how small the bumper support is, it lets the bumper be much thinner.


Just set the CF hood on it to see what will have to change, i will have to add quite a bit in the front and maybe change the body line.

I also still have a pair of N15 fenders and side skirts that will go on. Once i get the oil leak fixed i will mach everything up.

Other things to come:
Finish audio install, i have some more ideas which might change some things around.
Re-do interior again with better material.
Clean some things up under the hood and take care of some wiring.

Other than that just little things here and there to help finish it off. I think paint will have to wait so i am not sure if i will leave the front end on in multi-color or just spray it with a sealer to make it at least one color.

Son of a...!

Nice, so you got it hhah

Where did you get that front end?

I remember seeing that on there. What did they bag you on shipping?

$189 ship freight to my work. Packaging was perfect and nothing was damaged at all. I know for something like that it would cost us $150ish to ship that from our work with our carrier.

That's pretty cool! What kind of car is that off of? That little bar on the front bumper is different.
Get this thing on and get the car painted. Woot woot!!

N15 Pulsar Serie is what the auction said. The bumper without the bar is a little different from most that i have seen. I think you could pull of the bar if it was a hatch or wagon but not on a sedan. Once i get it mounted i will see what it looks like with the bar. I want to do some circular fogs in the black area most likely towards the inside. I want to try to get it mounted this weekend just to see how it looks. I will try to straighten out the fender too.

very nice, car will look great with the new parts

I did a few things today. Fixed the oil leak and started to charge the battery. I want to start it up today and see if there are any leaks.

I installed a new shorter throttle cable.


And completed my bracket to put the alternator in the rear so i can go to one belt.


After i start the car i will pull the PS delete idler pulley and put the alternator in the rear and find a belt to fit.

Whats the throttle cable off of? I should really get a shorter one otherwise i'll just have to shorten mine.

DJ told me about this, it is a B15 throttle cable. I had to swap the plate that goes on the inside of the car and move the bracket by the throttle body but other than that it is easy to install.

More info on the rear alt mod! What bracket do you use?