|
|
| Author | Message |
|---|
squirlz
Posts: 383
Join date: 2009-11-19
Age: 31
Location: New Glarus, WI
 | | Subject: Chipping B13 ECU's Tue Jul 13, 2010 6:00 pm | |
| I can chip B13 ECU's. This operates much like a Calum Basic ECU. You can change the chips at any time with a new bin burned into it to upgrade the tune or setup.
I will chip and install the bin of your choice into the ECU for $100 and program a new chip for $15 or an old chip you already have for $5, shipping extra.
Last edited by squirlz on Mon Aug 02, 2010 7:29 pm; edited 2 times in total |
|
  | |
Big Ben
Admin
Posts: 729
Join date: 2009-09-23
Age: 30
Location: Madison, WI
| | Subject: Re: Chipping B13 ECU's Tue Jul 13, 2010 6:16 pm | |
| Damnit! I wish you could do B14's!! I might get one just for shits and giggles. That is super cool that you are getting to that! |
|
| | |
squirlz
Posts: 383
Join date: 2009-11-19
Age: 31
Location: New Glarus, WI
| | Subject: Re: Chipping B13 ECU's Tue Jul 13, 2010 6:28 pm | |
| Convert, that is what i am doing. Trust me, it will be worth it. More info to come. |
|
| | |
Big Ben
Admin
Posts: 729
Join date: 2009-09-23
Age: 30
Location: Madison, WI
| | Subject: Re: Chipping B13 ECU's Tue Jul 13, 2010 7:15 pm | |
| Can you make a conversion harness?
|
|
| | |
squirlz
Posts: 383
Join date: 2009-11-19
Age: 31
Location: New Glarus, WI
| | Subject: Re: Chipping B13 ECU's Tue Jul 13, 2010 7:25 pm | |
| Possibly, i think i will use the B13 harness and just swap the dist connector to use the B14 one. I will see if i can find a conversion harness somewhere. |
|
| | |
nismos13silvia
Posts: 321
Join date: 2009-11-21
Location: Madison, WI
| | Subject: Re: Chipping B13 ECU's Wed Jul 14, 2010 12:00 am | |
| Good stuff. Glad someone local is doing it. I was going to start chipping as well after Calum stop. I was going to try to do B14/S14's as well. But, after a lot of thinking it over LONG AND HARD. Decided NOT to do it. |
|
| | |
squirlz
Posts: 383
Join date: 2009-11-19
Age: 31
Location: New Glarus, WI
| | Subject: Re: Chipping B13 ECU's Wed Jul 14, 2010 5:58 am | |
| | nismos13silvia wrote: | | Good stuff. Glad someone local is doing it. I was going to start chipping as well after Calum stop. I was going to try to do B14/S14's as well. But, after a lot of thinking it over LONG AND HARD. Decided NOT to do it. |
I cant find the chip sets, otherwise i would. Or is it the same for the B14's? |
|
| | |
slacker
Posts: 86
Join date: 2009-11-21
Location: Madcity area
| | Subject: Re: Chipping B13 ECU's Wed Jul 14, 2010 7:08 am | |
| p10's fit in there anywhere? |
|
| | |
squirlz
Posts: 383
Join date: 2009-11-19
Age: 31
Location: New Glarus, WI
| | Subject: Re: Chipping B13 ECU's Wed Jul 14, 2010 7:31 am | |
| Yours is OBDI, same as B13, can be chipped. |
|
| | |
nismos13silvia
Posts: 321
Join date: 2009-11-21
Location: Madison, WI
| | Subject: Re: Chipping B13 ECU's Wed Jul 14, 2010 7:58 am | |
| | squirlz wrote: | | nismos13silvia wrote: | | Good stuff. Glad someone local is doing it. I was going to start chipping as well after Calum stop. I was going to try to do B14/S14's as well. But, after a lot of thinking it over LONG AND HARD. Decided NOT to do it. |
I cant find the chip sets, otherwise i would. Or is it the same for the B14's? |
I believe they're NOT the same. |
|
| | |
insane imports
Posts: 274
Join date: 2009-11-29
Age: 29
Location: kimberly, WI
| | Subject: Re: Chipping B13 ECU's Wed Jul 14, 2010 6:17 pm | |
| Could you burn me a chip that will work in a jwt ecu?
I am currently running a jwt b13 ecu in my car and i want the injector sizes changed. |
|
| | |
squirlz
Posts: 383
Join date: 2009-11-19
Age: 31
Location: New Glarus, WI
| | Subject: Re: Chipping B13 ECU's Wed Jul 14, 2010 6:29 pm | |
| | insane imports wrote: | Could you burn me a chip that will work in a jwt ecu?
I am currently running a jwt b13 ecu in my car and i want the injector sizes changed. |
Most likely. i will make the order soon. If you could pop the top open and get a part number off of the chip or better yet take a picture of the chip. I will check to make sure i can get and burn that chip, i think i have heard others doing it so it should be possible. |
|
| | |
Big Ben
Admin
Posts: 729
Join date: 2009-09-23
Age: 30
Location: Madison, WI
| | Subject: Re: Chipping B13 ECU's Wed Jul 14, 2010 7:10 pm | |
| I dont think you are able to put other chips in JWT's ECUs... If you can that would be fucking awesome! |
|
| | |
BORNGEARHEAD
Posts: 246
Join date: 2009-11-18
Location: Madison, WI
| | Subject: Re: Chipping B13 ECU's Wed Jul 14, 2010 10:11 pm | |
| Good stuff, Nick. This will give a lot of the midwest guys versatility and options. |
|
| | |
squirlz
Posts: 383
Join date: 2009-11-19
Age: 31
Location: New Glarus, WI
| | Subject: Re: Chipping B13 ECU's Thu Jul 15, 2010 5:49 am | |
| I know you can pull the bin off of the JWT's. I am not sure on re chipping them though. We will figure it out. |
|
| | |
|
